|
HomePage
CCTV Cameras
Spy Cameras
Network Video Server / Camera
Burglar Alarms
Alarm Monitoring
Fire
Alarms
Access Control
Annual Fire Testing
Structured Wiring
Central Vacuum
Paging Systems
Background Music
Home Pre-wire
Network Wiring
Intercom
Telephone Wiring and jack install
Satellite TV
Home Theatre
Cable TV Wiring
Lease Program
Community
Contest Page
| |  Bogen Amplifiers, many to choose from...
RM350D Combo Tuner/Amp
AM / FM 35-Watt Digital Receiver
The Bogen RM350D is a unique, self-contained paging system for small- to medium-sized applications. It combines a digital tuner, microphone, and aux inputs with a 35-watt output capable of driving 4- and 8-ohm speaker systems as well as 25 or 70 volt distributed systems.
The tuner section uses a PLL synthesizer to provide accurate frequency selection. An LCD display shows the frequency readout. The tuner may be programmed with up to 18 FM and 12 AM preset stations. Pushbuttons are provided to tune stations, select presets, and scan preset stations.
Microphone input accepts a balanced Lo-Z microphone. The input uses a three-pin standard mic connector and has its own volume control. The input includes a switch-selected ALC circuit to maintain a uniform output level. The input also includes VOX activated music muting of the program from tuner or aux source. Provisions are included to mute the program using dry contacts from a customer-supplied switch (selectable for normally open or closed; factory set for normally open).
A pushbutton on the front panel is used to select program from the tuner or aux input. The aux input consists of an RCA jack and can accept signal from a cassette tape, CD, or other line level source. Bass, treble and volume controls are provided to adjust the level of selected program (does not affect the microphone input).
The receiver permits connection of up to four switch selected paging zones. A pushbutton is included to select all zones at once. A pre-page output lets you route tuner or auxiliary program to a telephone music-on-hold input. The output is not affected by volume, bass, or treble settings.
The receiver can accept input from a telephone line when an accessory transformer (the Bogen Model WMT1A) is used as the interface.
Output taps are provided for direct connection of 4- and 8-ohm speakers and for connection of 25 or 70 volt distributed systems. Individual zone taps are provided for ease of connection. An impedance jumper is provided to set the output signal on the zone taps.
The receiver operates from nominal 120V/60Hz AC. It may be rack-mounted using optional accessory brackets (Model RPK47), or placed upon a shelf. An FM dipole antenna, AM loop antenna, mono patch cord, and stereo-to-mono patch cord are included with the unit.
Features:
PLL synthesized tuning with digital readout
18 FM & 12 AM presets
35-watt audio output
Switch-selected page zones
MIC includes VOX- or contact-activated music muting
MIC input Automatic Level Control (ALC)
Memory scan
Bass and treble controls
AUX input
UL listed
Technical Specifications
Band Coverage: AM — 530 to 1620kHz; FM — 87.5 to 107.9MHz
Tuning: PLL Synthesizer
Channel Indicator: LCD panel
Station Tuning: Pushbutton
Preset Memory: 18 FM, 12 AM
Memory Scan: Preset stations
Power Rating (RMS): 35 watts
Audio Frequency Response: 20Hz to 20kHz Direct; 70Hz to 15kHz Transformer
Audio Sensitivity: 80mV Aux; 750µV Lo-Z Mic
Microphone Input: Lo-Z (XLR-312C connector)
Aux Input: RCA jack accepts input from cassette tape, CD or other line-level source
Pre-Page Output: Lo-Z via RCA jack
Tape Output: Hi-Z via RCA jack
Output Taps: 4- and 8-ohm, 25V, 70V
ALC: Switch-selected
Mic Precedence: VOX-triggered or dry contact
Program Selection: Push button
Controls: Volume, Bass, Treble, Microphone Volume
Power Required: 120V AC nominal @ 60Hz, 98W
Dimensions: 12"W x 3-1/2"H x 8-1/2"D
Shipping Weight: 14 lbs.
RM350D FM/AM Receiver w/ Digital Display MSRP$657.50 $525.00 14 lbs.
|
236
South Ash Street, Moses
Lake,
Washington
USA
98837
